healthcare simulation and analytics

Simulation Software Comparison and Advantages

Next generation dynamic simulator operates under an entirely different paradigm than traditional static tools. The graphical interface used to build models does not generate or compile code since it interfaces directly with the multi-core simulation engine. When the simulation starts, the animation instantly displays, both in 2D and 3D , the current state of the engine. As inefficiencies develop, real time modifications can be made to model properties and constraints. These “on-the-fly” changes allow users to instantly realize potential gains and perform dynamic optimization.

Simulation Software For Lean Healthcare Implementation

healthcare simulation

Most improvement initiatives begin with a Value Stream mapping exercise. The value stream map takes into consideration one aspect or product of the operation and analyzes the effect of waste. With a single product with no variations that flows sequentially, a static value stream is adequate. But, when analyzing multiple product interactions, non sequential flows, and the interaction among multiple value streams, the static environment fails. Moreover, static streams do not take into consideration fluctuations in demand, workforce, and other dynamic operational constraints. This patented technology is the first of its kind on the market today.

Process Modeling Simulation Software

Implementing Simcad Pro In Your Environment Is A Simple 3 Step Process:

  • 1.) Graphically create the model flow and constraints without the need for code (GUI interfaces directly to the engine)
  • 2.) Make "on-the-fly" model changes to model constraints and parameters during the simulation run then view your results using Simcad Pro's built in lean reports and onscreen graphs/gauges to obtain the optimal operational improvements.

Monte Carlo Simulation Software

Monte Carlo simulations can be used to study the variability of the model and determine the model behavior boundaries along with the expected performance. In simulation models that contain variable failure rates, variable processing rates at each stations, and variable inputs, Monte Carlo simulation runs can be a tremendous asset to any organization in order to understand the intricate behavior of the model environment. Simcad Pro created models benefit from the fact that Simcad Pro integrates all the tools required to run and analyze Monte Carlo simulations quickly and effectively. Coupled with the patented On-the-fly dynamic model updates, Simcad Pro provides an unprecedented simulation environment unmatched in the industry.

What is Simulation?

What is Simulation? - Simulation Explained

Simulation software and methodology have been successfully used in supply chain, logistics, and manufacturing for many years and will continue to play a major role in these industries. The drive for more efficient operations, producing more with less, and constantly increasing and refining quality has been the driving force in adopting simulation software. Moreover, the heavy shift toward lean thinking and six sigma methods coupled with increasing operational variability have forced many companies to introduce dynamic predictive technologies to be an integral part of their daily operation procedures.

Business Success with Simulation

Ensuring Success with Simulation

Simulation is an approximation of reality, the level to which it mimics reality depends on the tool and method used to implement the simulation model. The closer the simulation model mimics reality, the better its results and analysis are, while the faster the model is built and validated the greater the return on investment.

Modeling Simulation Software

Most simulation tools available on the market today provide an interface to allow for model creation, a simulation engine, and a post-simulation analysis tool. The user interface is setup as either a pure coding environment, or a visual interface that creates code in the background, either way, coding is required to do any type of useful modeling. After the code is built and compiled, the simulation engine would run for a set amount of time after which the user is presented with the data to be either animated or charted.

Comparison Of Simulation Software

Simulation Information

Simcad Pro Question & Answer

1.) How long has Simcad Pro been on the market?

The first version of Simcad Pro was released in February of 1996. Since then, and through customer feedback, CreateASoft successfully added most of the requested features. For that reason, Simcad Pro features list is customer driven and contains the required capabilities to handle today's complex business world.

Value Stream Map - Value Stream Efficiency Analysis

Simulation Information

LEAN ====> Eliminate Waste. Increase Efficiency

It has been proven that Lean methods improve efficiency, reduce cost, and increase the overall profitability of organizations. Although different variations of these methods have been applied to different industries, the fact remains, that if implemented correctly, Lean methods work. Today's organizations need to be very adaptive, and very dynamic in the way they react to consumer demand; and what better way to adapt than with a dynamic tool? Avoid lost opportunity and lost revenue, by eliminating slow operational response with Simcad Pro 's patented dynamic technology.

Improve Patient Wait Times in the Hospital

Healthcare Simulation

Hospital Patient Wait Times : One of the most unpredictable environments in the Healthcare Industry is the Emergency Department, ED. We have all been there, spending countless hours in a waiting room only to finally receive medical attention in a hallway, or if you were lucky enough to make it to an examination room, you sat hopeless, wondering if a doctor even knew that you existed. Excessive patient wait times can be tolling on the patient both physically and emotionally; affecting the morale of the patient, doctors, nurses and medical staff. Let's take a look at some of the most common contributing factors (and their implications) which lead to one of America's biggest challenges in the healthcare community today; optimizing the ED to reduce patient wait times and increase overall efficiency.

Healthcare Staffing Scheduling Management

Healthcare Simulation

Healthcare Staffing: One of the key challenges facing clinics and hospitals today is their ability to control the number of care provider available based on the varying number of patients. With a variable patient arrival rate and treatment requirement, these organizations are faced with one critical decision; how many staff members do we need to keep patient wait time low and minimize the Left without being seen patients?

Hospital Management

Healthcare Simulation

Because of the high levels of variability that are present within a hospital, it is important to make every effort to provide patients with a positive experience, reduce wait times, increase efficiency and effectively utilize resources and staff. Simcad Pro is a sophisticated simulation engine that can be utilized to improve the overall efficiency of a hospital. Simcad Pro has been shown to improve staff allocation and layout of the hospital to increase efficiency of care without having to sacrifice the quality of administered care.

Lab Simulation

Healthcare Simulation

Within a Lab setting, the issues of excessive wait time, excess travel time, low equipment utilization, and increased operational cost daily are always present. Within the lab setting, it is important to improve efficiency and to reduce lead time. Simcad Pro is a sophisticated simulation engine that can be utilized to improve the overall efficiency, accuracy and effectiveness within a laboratory, which in turn increases possible workload and monetary gains.

Hospital ER Simulation

Healthcare Simulation

With the high level of variability that is ever present within Emergency Rooms, it is important to make every effort to reduce wait times, improve patient experience, increase efficiency and utilize time wisely. Simcad Pro is a sophisticated simulation engine that can be utilized to improve the overall efficiency of the Emergency Room. The use of Simcad Pro has been shown to improved Emergency Room efficiency, accuracy and effectiveness, which in turn improves patient outcomes and the quality of care that is received. In addition, staff allocation and efficiency can be better forecasted and analyzed, reducing the overall cost of care without sacrificing the quality of care.

Patient Flow in the Hospital

Healthcare Simulation

Hospital Patient Flow with Simcad Pro Health Simulation Software

With the seemingly ever increasing cost of healthcare, it is becoming more and more important to improve efficiency and to find a way to utilize resources to their fullest potential for the benefit of both the institution and the patient. After all, without patients, a medical institution would not be needed at all. This fact makes patients one of the most important factors in healthcare today. Simcad Pro Health is a sophisticated simulation engine that can be utilized to improve the overall efficiency of healthcare facilities and to improve patient flow and decrease wait times without sacrificing the quality of care being administered.

Pharmaceutical Simulation

Healthcare Simulation

Like most sectors of the healthcare industry, pharmaceutical settings can often be unpredictable, making it difficult to achieve optimal service quality and efficiency. With the high costs associated with pharmaceuticals, it is important to optimize production and distribution time. Simcad Pro is a sophisticated simulation engine that can be utilized to improve the overall efficiency of a Pharmacy...

Dynamic Simulation for Lab Optimization can help increase efficiency

Dynamic Simulation for Lab Optimization can help increase efficiency - Utilizing Dynamic Simulation for Lab optimization can help increase efficiency, reduce travel time, control production. Reduce WIP and the overall operation cost...

Improve patient wait time and increase operational efficiency in the ED / ER

Improve patient wait time and increase operational efficiency in the ED / ER - One of the most unpredictable environments in the Healthcare Industry is the Emergency Department, ED. We have all been there, spending countless hours..


Decreasing Patient Wait Time And Increasing Operational Efficiency in The ED - The Emergency Department is a critical area within the Healthcare Industry. It is also one of the most unpredictable environments. Excessive wait times within the Emergency...


The Role of Dynamic Simulation® in Process Improvement Initiatives - In every industry, from manufacturing to services, logistics and healthcare, there is an increasing need to do more with less, increase efficiency while reducing cost, and improve utilization while maximizing...